Bipartisan Energy Efficiency Bill On Verge Of Senate Breakthrough

While many in Washington still warn about the dangers of carbon emissions and climate change, the reality and perhaps the one thing that experts on both sides agree on, is that Americans are paying less attention to global warming than they have in the past. To end this uncertainty, the Senate after months of behind the scenes maneuvering will begin the debate on the critically important legislation which could help American consumers, businesses and the federal government to save millions of dollars each year by using less energy, and using less energy will be a step forward in the fight against climate change in the U.S.
The new energy efficiency legislation introduced by Senators Shaheen and Portman could come up before the U.S. Senate for approval. The Energy Savings and Industrial Competitiveness Act, also known as Shaheen-Portman Bill will help to reduce the energy bill of U.S., improve its economic competitiveness, create new American jobs and enhance U.S. energy security. The bill has been endorsed by more than 200 businesses, trade associations and advocacy groups.
What is the Energy Savings and Industrial Competitiveness Act?
The Shaheen-Portman Energy Efficiency Bill passed the Senate Energy and Natural Resources Committee by a 19-3 vote, it includes provisions that will directly improve energy efficiency in buildings, industrial processes and federal agencies, the provisions in the bill include strengthening energy efficiency requirements in building energy codes, incentivizing energy efficiency using rebates and for certain equipment, encouraging energy efficiency supply chains through a new supply star program.
The American Council for an Energy Efficient Economy (ACEEE) found implementation of the bill would save about 9.5 quadrillion btus (british thermal units) between 2014 and 2030, or nearly one tenth of the annual energy use in the U.S. As the second largest consumer of energy in the world and the worlds biggest economy it is critically important for the United States to improve energy efficiency, the bill has received bipartisan support with seven Republicans and twelve Democrats in favor of the bill. It contains a variety of policies and programs to reduce residential, commercial and industrial energy use and focusing on sectors and areas with energy savings potential such as the residential, commercial and industrial sectors, the bill also restricts inefficient energy practices that will cost the U.S. economy billions of dollars and millions of jobs every year. One of the components of the bill also requires the Federal Government- which is the largest user of energy adopt energy saving techniques and best practices to operate efficiently.
Commenting on the bill Senator Portman said Washington can seem pretty divided these days, but there are some things on which we all can agree. This bill is one of them it is good for the economy and good for the environment. By making it easier for employers to use energy efficient tools, we are helping them to reduce their costs, enabling them to put those savings towards expanding their companies and hiring new workers.
The bill has received positive feedback and widespread support, the only constraint halting the success of the bill are the amendments lawmakers are trying to attach to it. The successful passing of this bill will not only help in mitigating climate change in the U.S. and reduce carbon emissions but also be a trendsetter for other countries to follow suit.

http://www.internationalfinancemagazine.com/article/Bipartisan-Energy-Efficiency-Bill-Verge-Senate-Breakthrough.html

Visit was sobering, says Jesse. Saw a country with considerable

Visit was sobering, says Jesse. Saw a country with considerable potential for expansion in dairy exports and a cost of production that roughly half that of the United States. If international markets improve, milk is more likely to flow from there than here. I was so happy cheap jerseys from china to play with other people, the only social interaction I had had beyond strange colleagues and needy students in three weeks. After we volleyed, she invited me titanium pot to go running with her after teaching. It turned out we had similar schedules, free after 2:35 on Tuesdays and Thursdays.. “I think there is a very positive mindset as we enter the holiday season,” Cornell said Tuesday. “That being the case, we think we’ve got to win through experience. We’ve got to have great product. Her family hadn’t talked about it. Her mother, a teenager at the time, said she didn’t remember details. Citizens were incarcerated and the Constitution violated.. For most consumers, the nightmare begins after the credit card is swiped. Then, the reality of the delivery schedule kicks in. Many furniture delivery trucks rival the cable guy for late or no shows. And these birds in a bag are small enough that you won’t have too many leftovers. Well, we have a few different easy options for you. And most are rather inexpensive and will take no time or effort at all.. One of my cycling friends has also kitted out Wholesale NFL Jerseys China his cheap custom nfl jerseys bike with an extremely practical handlebar basket combo. All one piece, this is a robust option that gives him a secure space where he can throw loose bits and pieces. He has mentioned that it does affect the bikes handling a little more than a rear mounted rack, but the advantage is that he can keep an eye on his gear and theres no risk of having an unsecured bag slip off without noticing.. The partnership will aim to educate parents and community members on healthy, affordable food options available to ensure fewer kids and teens go hungry this summer.The Summer Food Program, in its seventh year, is part of an existing national partnership between Y USA and the Walmart Foundation to address child hunger, which is more prevalent in communities during the summertime. Made possible by a 15 month, $7.1 million grant from the Walmart Foundation, the Y is better able to reach kids in need. The Summer Food Program is part of the Y year round effort to address child hunger; during the school year, the Y Afterschool Meal Program provides a combination of learning activities cheap jerseys and healthy meals and/or snacks at the end of the school day.Leanne Brown best selling cookbook Good and Cheap provides an avenue to healthy and affordable meals by educating readers on how to prepare nutritious recipes to eat on $4/day the average amount of money a person receives from the government Supplemental Nutrition Assistance Program (SNAP).

We loved doing it. We’re going to miss it. Thank

We loved doing it. We’re going to miss it. Thank you for being on the other end of that glowing screen. Which is why some companies have begun creating batteries that don’t look like batteries. In Bath County, Virginia, they’ve set up a dam and two reservoirs. During the day, when people need power, the water flows downhill, spinning turbines and generating electricity. BYH Gov. Cooper. You announced three new companies either locating or expanding, 250 new jobs and a $400 million wholesale china jerseys investment. cheap mlb jerseys I could get all snobby about this chain restaurant being soulless as it is obviously one of many. But I recommend lots of other people from the trade go there. Check out the smiles and the friendly demeanour of all the staff. Makes this egregious is that there was someone who was sitting on the beach enjoying the wonders of our state, said Deputy Prosecutor Kerry Glen. Walked up behind her and hit her over the head. Hitting the woman, a visitor from England who was pregnant, Deldotto took her car keys, stole her car and left, Glen said. 1. Make a list. Plot out the gifts you need to cheap nfl jerseys buy in the year ahead. The backyard swimming pool perfectly encapsulates the problem. Pools have no natural inflow or outflow of water. Without regular maintenance, such as chemical adulteration and continuous filtration, they can rapidly become incubators of insects and microbes. You have to consider how and where you will be using the karaoke machine. custom jerseys If you are just going to cheap custom nfl jerseys use it for family fun or parties at other people’s house, make sure that it is sturdy enough and very portable. You can just look for used karaoke machines online or your local used equipment stores. The marijuana industry is trying to move away from its pizza and Doritos roots as folks explore how to safely serve marijuana and food. Chefs are working with marijuana growers to chart the still very unscientific world of pairing food and weed. And a proliferation of mass market cheap pot is driving professional growers to develop distinctive flavors and aromas to distinguish themselves in a crowded market.. Maybe you’re not that into skiing or snowboarding. Maybe you’re just learning or trying to save money. Four Packs of lift tickets usually run between $100 and $200 and will sometimes offer your choice of two mountains for one price. For the report, researchers analyzed data from ToxIC, which is not geographically representative of the United States. Among these, 456 cases reported by 50 sites involved synthetic cannabinoids. Yet, a jump occurred in the final reporting year.

Energy Efficiency And The Us Heavy Industry

Heavy Industry’ is a rather amorphous term. According to Wikipedia, Heavy Industry signifies the production of goods that are either heavy in weight or in the processes leading to their production.Examples of such industries include steel, chemical, mining, and construction equipment, machinery.

The United States is the largest consumer of energy in the world, using 94.9 quadrillion BTUs in 2009 and heavy industry in the United States accounts for about 31% of all energy consumption, significantly more than any other sector of the economy. Seven energy-intensive industries use three-fourths of this power; these are aluminum, chemicals, forest products, glass, metal casting, mining, and steel. All these heavy industries are also under tremendous pressure to reduce their huge dependence on expensive non
renewable energy.

A recent study by the European Commission thinks not. The study estimates that the United States has the potential to save about 45 TWh energy per year, through use of energy efficient transformers. Even a 0.01 percent gain in the average efficiency of utility transformers installed in the U.S. in a single year, can save as much as 2.9 Twh energy.

The environmental benefits of energy-efficient transformers are also significant and the study by the European Commission believes transformers could well emerge as a major focus for energy efficient
initiatives in the industry.

Energy Guzzling Industries
Chemical Industry,
Paper and Pulp Industry
Iron and Steel Industry
Mining Industry

Is the Answer Energy-Efficiency

Energy efficiency is already playing a significant role in the Heavy Industry, but with growing concerns of greenhouse gas emissions and skyrocketing cost of energy, it obviously needs to do more.Before the 1970s, the U.S. energy consumption grew in parallel to gross domestic product (GDP). Had that trend continued, current U.S. energy demand would have more than doubled, currently, the energy consumption is 1.5 times that of 1970. Reduction in energy consumption has resulted from a combination of energy efficient methods and a shift from energy-intensive manufacturing toward a service and information-based economy.

Do Energy Efficient Transformers Hold the Key?

As energy costs rise and availability becomes uncertain, the necessity of utilizing energy-efficient products becomes imperative. Additionally, a globally competitive business environment is causing businesses to cut costs in order to remain competitive. Of particular interest are distribution transformers
that are the largest loss-making components in electrical networks.

In a typical grid, electric transformer loss contributes to about 40-50% of the total transmission and distribution loss. The Environmental Protection Agency (EPA) estimates that on a conservative estimate 61 billion kWh annually can be attributed to transformer losses. These losses cost end-users $3 to $4 billion annually. An energy-efficient transformer is therefore an important means to reduce transmission and distribution loss. Energy saving transformers can additionally save the equivalent of more than 70 million tons of CO2 emissions.

The answer to energy efficiency is in making distribution transformers efficient; and thankfully, manufacturers have the technical know-how to offer better, cost effective, low loss, energy efficient transformers.

Energy Efficient Distribution Transformers

Distribution transformers distribute power from power generating facilities to end-users and while energy loss during transmission is inevitable, measures are taken to reduce it considerably.However, for energy to be consumed voltage needs to be reduced and it is at this point of stepping down electricity that distribution transformers lose energy. Even though only a small portion of energy is lost it is in a permanent manner and standby power losses account for 2% of total electricity production.

Despite high average efficiencies of 95 to 99.75%, transformers have a significant environmental impact because they continuously consume power.

The energy losses in electricity transformers fall into two components, namely, no-load losses resulting from the energized iron core, which is a permanent phenomenon, and load losses, arising when providing power to users. Load losses also result from the resistance of the coil when the transformer is in use, and from eddy currents due to stray flux.

Technical solutions exist to reduce transformer losses by 75% at minimum when replaced by modern transformers or even by 90% when replacing transformers over 30 years old. Energy-efficiency can be improved with better transformer design, like selecting better, lower-core-loss steels; reducing flux density in a specific core by increasing the core size; increasing conductor cross-section to reduce current density; good balancing between the relative quantities of iron and copper in the core and coils.

An energy efficient transformer is an important means to reduce Transmission & Distribution loss and can save up to 120 TWh / year. Energy efficient transformers can provide considerable environmental benefits too. For example, a typical urban distribution transformer rated at 400 kW has lifetime losses equivalent to 125 “”184 tons of CO2 emissions; a more energy-efficient design can reduce these emissions to 56 tons.

Air Conditioning Systems

Air conditioning refers to a system for controlling and regulating the humidity, ventilation and the temperature of a building or room for making it comfortable for the occupants. Air conditioning finds application in domestic, commercial and industrial fields.

Air conditioning also form an integral part of the medical and transportation sectors also, in both hospitals and transporting temperature fragile goods.

Conventional methods of air conditioning require a large energy source for maintaining the temperature. This translates into a high-energy requirement, high cost and high carbon dioxides emissions which has negative impacts both economically and with regard to the environment A break through in the air conditioning field came with the use of a new technology which makes use of the latent heat from the outside environment for controlling and regulating the indoor temperature. Using this technology Daikin has startled the Air conditioning industry with the production of its all-new Altherma! Daikins Altherma has high-energy use optimization.

This has been made possible with the advent of the new technology which absorbs the latent heat from the environment for its process. Altherma from Daikin has literally revolutionized the air conditioning industry.

Conventional air-conditioning systems depend upon water at heightened temperature during winter seasons to regulate the temperature. Modern day buildings are well-insulated structures built specifically with the comfort and well being of the occupants in mind. These well insulated buildings have made it easier for the working of the air conditioning systems making a reduction in the temperature of the water circulated thus saving a lot of energy. Altherma comes with a hydro-box that is compact and can be installed in limited spaces out side the building.

Air conditioning refers to the cooling and de-humidification of indoor air for thermal comfort. In a wider sense, the term can be referred to as any form of cooling, heating, ventilation or disinfection that modifies the condition of air.

An air conditioner or an air-con is an appliance, system, or mechanism designed to stabilize the air temperature and humidity within an area, typically using a refrigeration cycle but sometimes using evaporation. Most commonly for comfort cooling in buildings and transportation vehicles. Refrigeration air conditioning equipment usually reduces the humidity of the air processed by the system. The relatively cold evaporator coil condenses water vapor from the processed air, sending the water to a drain and removing water vapor from the cooled space and lowering the relative humidity.

For air conditioning in residential homes, some countries set minimum requirements for energy efficiency. In the United States, the Seasonal Energy Efficiency Ratio (SEER) often rates the efficiency of air conditioners. The higher the SEER rating, the more energy efficient is the air conditioner. The SEER rating is the BTU of cooling output during its normal annual usage divided by the total electric energy input in watt-hours during the same period.

How To Improve The Us Economy – A Political Perspective

The United States has been in a recession since December, 2007, as defined by the National Bureau of Economic Research, a private, nonprofit research organization. But the American people, and the Obama administration along with the democrat majority congress, seem to be at odds on how to fix the American economy.

A robust economy means companies expand which results in job creation. Currently, the American people are not spending because many are not working, and those who are working are spending less, most likely due to the possibility of losing their job. Current unemployment rate stands at 9.6% as of August, 2009. A decrease in spending by the American people results in a decrease in company profits, company non expansion, and more layoffs.

Reporting on a survey by Watson Wyatt, a consulting firm, the HRSpecialist.com reported in November of 2008 that one-fourth of U.S. employers plan to have staff reductions during the following calendar year. We are now seeing this come to fruition for 2009.

So how can the US economy improve? Improvement being defined as two consecutive quarters where we do not have negative growth in the GDP (gross domestic product). The following is what we call the Steps to Economic Improvement. These are steps for consideration which hopefully result in a healthy bipartisan discussion between our elected congressman and their constituency. These steps may result in non-recessionary growth of our economy.

You may or may not agree with these steps, but at a bare minimum, these are points to consider, and ideally result in a healthy discussion with our elected congressmen, which at last check, is one of the unchanged notions of a free democratic society.

Steps to Economic Improvement:

1) The first step is to realize that it is business and not government that creates jobs and wealth within the American society. This is where we believe is the heart of the problem. It is evident that the Obama administration believes it is government that will lead Americans to economic prosperity. This is why the federal government has put forth a $780 billion stimulus package. So where is this money really going. Lets take a look at the breakdown. (source Republican Senate office, CNN.com AC360)

$780 Billion Stimulus Package:

MORE THAN $43 BILLION IN TRANSPORTATION INFRASTRUCTURE INVESTMENTS
$27 BILLION FOR HIGHWAY, ROAD AND BRIDGE INVESTMENTS
$8.4 BILLION FOR PUBLIC TRANSIT INVESTMENT
$2 BILLION FOR HIGH SPEED RAIL
$1.3 BILLION FOR FAA AIRPORT IMPROVEMENT FACILITIES AND EQUIPMENT
$850 MILLION FOR AMTRAK
$250 MILLION FOR GRANTS TO STATES FOR INVESTMENT IN HIGH SPEED AND INNER CITY PASSENGER RAIL
$100 MILLION TO MARITIME ADMINISTRATION FOR ASSISTANCE TO SMALL SHIPYARDS
$76.8 BILLION IN EDUCATION INVESTMENTS
$39 BILLION FOR STATE FISCAL RELIEF TARGETED DIRECTLY FOR EDUCATION
$13.9 BILLION FOR PELL GRANTS
$13.5 BILLION FOR SPECIAL EDUCATION FUNDING
$10.4 BILLION FOR TITLE I
$6.4 BILLION FOR WATER AND SEWER INFRASTRUCTURE
$3 BILLION FOR JOB TRAINING
$3.25 BILLION FOR WORKFORCE INVESTMENT PROGRAMS
$160 MILLION FOR JOB CORPS
$87 BILLION IN TEMPORARY AND TARGETED MEDICAID RELIEF TO STATES
$5 BILLION FOR SUPPLEMENTAL GRANTS TO PUBLIC HOUSING AUTHORITIES FOR CAPITAL NEEDS
$4.7 BILLION FOR STATE AND LOCAL ENERGY EFFICIENCY BLOCK GRANTS
$4.4 BILLION FOR SMART GRID
$2.9 BILLION FOR WEATHERIZATION PROGRAMS
$2 BILLION FOR ADVANCED BATTERY MANUFACTURING
$7 BILLION FOR LOAN GUARANTEES FOR STANDARD RENEWABLES
$800 MILLION FOR CONSTRUCTION OF PORTS OF ENTRY
$500 MILLION FOR FIREFIGHTERS ASSISTANCE GRANTS
$1.2 BILLION FOR NATIONAL SCIENCE FOUNDATION

As part of the 2010 budget proposal, the Obama administration has also proposed additional measures to attempt to stabilize the economy, including a $23 trillion measure aimed at stabilizing the financial system and freeing up credit. In a nutshell, auditors from the Congressional Budget Office have said that Obama’s budget would produce $9.3 trillion in deficits over the next decade.

This is a large chunk of change that needs to be provided by the American taxpayer! But the question is, will all of this spending help the long term growth of the US economy? Growth being during the period of not just the next few years, but rather 10 to 15 years. We believe it will not and here is why.

2) These programs burden the tax payer. History has shown that long sustained economic growth can not take place when the tax payer is over burdened by a federal deficit. Also, when the government spends money they do not have, they print more money, which results in a devaluation of the US dollar. This results in inflation.

3) Small businesses employ just over half of U.S. workers. How do you define a small business. The Office of Advocacy defines a small business for research purposes as an independent business having fewer than 500 employees. In examining the $780 billion stimulus package, you can see that there is no real help for small business. Remember, job creation is needed for economic recovery.

4) The socializing of America will not result in long term economic growth. The massive spending that the Obama administration has proposed will result in an even greater tax burden to the American people.

Most Americans believe in the frame work and meaning of The Constitution of the United States. The first words of the Constitution “We the People” make it clear that our government was established to serve the people. The essence of a democracy was eloquently stated by President Lincoln in his Gettysburg Address “that government of the people, by the people, for the people, shall not perish from the earth.” This simply means that our elected president and congress have a responsibility to listen to the American people.

And it can be said that most Americans do not want a socialistic society for the United States. Government needs to stop spending the American tax dollar, simply because an escalating government deficit will not result in an overall improvement in our economy.

5) Programs such as Cash for Clunkers, auto industry bailouts, and the like, only in the end increase the tax burden on the American people. These massively expensive programs do very little to improve the viability and strength of most small business. Based on 2008 figures, there are 155 million workers in the United States. The car industry accounts for about 13 million of these workers. Therefore, most Americans will not benefit from the bailout of the auto industry. There is only a marginal at best improvement in the economy from such programs.

6) We do applaud the Obama administration for the injection of capital into the financial institutions, because for small business to flourish, there needs to be capital available, and commercial banks and other depository institutions are the largest lenders of capital to small business.

7) The economy will do much better when companies are left to compete in the market place with minimal government involvement. A case in point, the Reagan administration had a policy of less government during the 1980s. This resulted in long term economic growth. This is the exact opposite of what the Obama administration is trying to do.

The Obama administration was given a bad economy when Barack Obama took office. But the Obama administration has taken a bad situation and made it much worse. Many economists believe that our economy would return anyway, with minimal government involvement. In terms of the economy, the government many times creates or prolongs problems and really does not solve them. A case in point, the deregulation of the banking industry which resulted in sub-prime lending. This created an eventual financial collapse, which resulted in the down turn in our economy and our current economic meltdown.

To conclude, the concept of minimal government is an important component for a strong American economy. Letting companies naturally compete within a free democratic society, with minimal government involvement, produces a robust economy, which benefits all Americans. The writers of the Constitution of the United Sates, our founding fathers, believed that the role of government in the lives of people should be minimal. Should we not adhere to the principles of our Constitution?

By letting your voice be heard, it is the American people who in the end control the destiny of the United States. And in the end, it is the American people who will control the destiny of the American economy. Go to your congressmans website and contact them, discuss these points, express your opinion, and let them know how you feel. It is your right and duty as an American citizen.

Interior Design Is More Than A Career, It’s An Art Form

Interior design is much more than just a career; it is almost an art form. Interior designers are amongst the most creative, imaginative and artistic people in any industry. However, a good interior designer must be extremely disciplined, organized and skilled in business. Interior designers professionally combine their knowledge with aesthetically pleasing visions to design solutions that are safe, functional, and attractive.

As with any professional career, the practice of interior design can be a very rewarding and fulfilling job as long as hard work and self discipline prevails. Mastering interior design as a career requires time, energy, technical proficiency, vision, and dedication. Like the members of any professional service, an interior designer’s success depends entirely on her ability to satisfy her clients’ needs. Therefore, she must understand both the artistic and technical requirements of a project.

Communication is a must-have skill for professional interior designers, as they will be meeting and dealing with many different kinds of people throughout their careers. They must be able to communicate clearly and effectively, as well as be attentive listeners. Because interior designers often work side by side with other professionals such as architects, contractors, and other service providers, interior designers need to be both good team leaders and good team players. Negotiation and mediation skills are also very important attributes for an interior designer to possess.

Education is the single most important start in becoming an interior designer and involves enrollment in a college or university program followed by several years of professional experience, typically under the direct supervision of a senior interior designer in the industry. It generally takes around six or seven years to become a fully qualified interior designer. Courses of study may include but are not limited to:

-Business management
-Debate and problem resolution
-Art Appreciation
-Frequent lectures and field trips
-Computer Graphic design

Just like many other professional careers, such as lawyers, accountants, and many healthcare professionals, there is an entrance examination that all interior designers must pass. This interior design examination provides a method for identifying interior designers who have met the minimum standards, and it is a more formal way of making certain an individual is qualified in particular knowledge and skills. This examination also protects potential clients by assuring competent professionals. The National Council for Interior Design Qualification (NCIDQ) is the organization that is responsible for administering the examination twice annually throughout the United States and Canada.

The NCIDQ also conducts regularly scheduled research and uses the information gathered to update the examination. Twenty five states require interior designers to obtain licenses and certifications upon successful completion of the NCIDQ examination to protect the health, safety, and wellbeing of the public. In order to be eligible to take the NCIDQ examination, interior designers must have taken interior design education and have actual full-time interior design experience totaling to at least six years, with at least two of those years being postsecondary education.

Selecting The Right Windows For Energy Efficiency

Selecting The Right Windows for Energy Efficiency

New window technologies have increased energy benefits and comfort, and have provided more practical options for consumers. This selection guide will help homeowners, architects, and builders take advantage of the expanding window market. The guide contains three
sections: an explanation of energy-related window characteristics, a discussion of window energy performance ratings, and a convenient checklist for window selection.

Selecting the right window for a specific home invariably requires tradeoffs between different
energy performance features, and with other non-energy issues. An understanding of some basic energy concepts is therefore essential to choosing appropriate windows and skylights. As illustrated on the following page, three major types of energy flow occur through windows:

(1) non-solar heat losses and gains in the form of conduction, convection, and radiation;
(2) solar heat gains in the form of radiation; and
(3) airflow, both intentional (ventilation) and unintentional (infiltration).

Insulating Value

The non-solar heat flow through a window is a result of the temperature difference between the indoors and outdoors. Windows lose heat to the outside during the heating season and
gain heat from the outside during the cooling season, adding to the energy needs in a home. The effects of nonsolar heat flow are generally greater on heating needs than on cooling
needs because indoor-outdoor temperature differences are greater during the heating season than during the cooling season in most regions of the United States. For any window
product, the greater the temperature difference from inside to out, the greater the rate of heat flow.

A U-factor is a measure of the rate of non-solar heat flow through a window or skylight. (An R-value is a measure of the resistance of a window or skylight to heat flow and is the reciprocal of a U-factor.) Lower U-factors (or higher R values), thus indicate reduced heat flow. U-factors
allow consumers to compare the insulating properties of different windows
and skylights.

The insulating value of a singlepane window is due mainly to the thin films of still air on the interior and moving air on the exterior glazing surfaces. The glazing itself doesnt offer
much resistance to heat flow. Additional panes markedly reduce the U-factor by creating still air spaces, which increase insulating value.

In addition to conventional double-pane windows, many manufacturers offer windows
that incorporate relatively new tech- nologies aimed at decreasing U-factors.
These technologies include low-emittance (low-E) coatings and gas fills. A low-E coating is a microscopically thin, virtually invisible, metal or metallic oxide coating deposited on a glazing surface.

The coating may be applied to one or more of the glazing surfaces facing an
air space in a multiple-pane window, or to a thin plastic film inserted between panes. The coating limits radiative heat flow between panes by reflecting heat back into the home during cold weather and back to the outdoors during warm weather. This effect increases the insulating value of the window. Most window manufacturers now offer windows and skylights
with low-E coatings.

The spaces between windowpanes can be filled with gases that insulate better
than air. Argon, krypton, sulfur hexafluoride, and carbon dioxide are among the gases used for this purpose. Gas fills add only a few dollars to the prices of most windows and skylights. They are most effective when used in conjunction with low-E coatings. For these reasons, some manufacturers have made gas fills standard in their low-E windows and skylights.
The insulating value of an entire window can be very different from that of the glazing alone. The whole-window U-factor includes the effects of the glazing, the frame, and, if present, the insulating glass spacer. (The spacer is the component in a window that separates glazing panes. It often reduces the insulating value at the glazing edges.)
Since a single-pane window with a metal frame has about the same overall Ufactor as a single glass pane alone, frame and glazing edge effects were not of great concern before multiple-pane, low-E, and gas-filled windows and skylights were widely used. With the recent expansion of thermally improved glazing options offered by manufacturers, frame and spacer properties now can have a more pronounced influence on the U-factors of windows and skylights.

As a result, frame and spacer options have also multiplied as manufacturers offer improved designs. Window frames can be made of aluminum, steel, wood, vinyl, fiberglass, or
composites of these materials. Wood, fiberglass, and vinyl frames are better insulators than metal. Some aluminum frames are designed with internal thermal breaks, non-metal components that reduce heat flow through the frame.

These thermally broken aluminum frames can resist heat flow considerably better than aluminum frames without thermal breaks. Composite frames may use two or more materials (e.g. aluminum-clad wood, vinyl-clad wood) to optimize their design and performance, and typically have insulating values intermediate between those of the materials comprising them. Frame geometry, as well as material type, also strongly influences thermal performance properties.

Spacers can be made of aluminum, steel, fiberglass, foam, or combinations of
these materials. Spacer thermal perfor- mance is as much a function of geometry as of composition. For example, some well-designed metal spacers insulate almost as well as foam.

The table on page 3 shows representative U-factors for window glazing, frame, and spacer combinations under winter design conditions. Due to their orientation and their greater projected surface areas, domed and other shaped tilted and horizontal skylights have significantly higher U-factors than do vertical windows of similar materials and opening sizes.

Federal Brace, A company on the move.

This week Ive chosen to recount the incredible year Federal Brace has had bringing their customers Beautifully Crafted, Confident Supports. They have doubled their countertop bracket line by announcing the release of ten new styles. These fresh new countertop bracket designs augment the large selection of countertop supports already available under the Federal Brace brand.

The companys new Enterprise Support, Foremont Support, and Perrine Decorative Support styles are part of the new countertop mounted support line. The use of these brackets within this application type is to support an elevated bar directly from the lower countertop level. The brackets are mounted directly to the sub-counter and elevated on a counter or a bar on support plates at the top of the bracket.

Federal Brace announced the Bracket Backer , a designing enhancement with backer board trim that protects soft wall material behind brackets in heavy weight applications. This product is designed to prevent sheetrock flexing or crushing of soft wallboard materials.

They provide free video guides and tips regarding countertop and countertop bracket installations. These videos feature trained professionals using various support styles and types in many different applications. They create these videos for the benefit of their customers so they may gain knowledge of the countertop installation process and to see their countertop supports in action.

Federal Brace is no longer just a kitchen countertop support company. To finish out a year of expansive growth, the company is introducing a full line of sixteen shelf brackets. These new offering will include designs from Federal Braces most popular countertop support models. Now customers can match their countertop supports with decorative shelf brackets elsewhere in the home.

The Brunswick style support was featured for The KBISs Best In Show, in Chicago, where it garnered much interest and positive comments related to both its strength and style. At the IWF show, in Atlanta, wood workers marveled at the craftsmanship of the brackets and showered Federal Brace with positive comments.

When it comes to the customers needs, their needs are their number one focus and the driving force of their business. To meet the needs of the consumers they have expanded their offices and added more personal. They have added more dealers and distributors throughout the continental United States. Federal Brace has helped thousands of homeowners with countertop support solutions and is steadfast in supplying Beautifully Crafted, Confident Supports for America. Onto 2011!

Amish Built Solid Wooden Gun Cabinet.

When you think about something handmade in the United States you first would think of Amish made. The reason is the pride and tradition that the Amish have earned over the decades. The son of a fathers father was a woodworkers craftsman and was shown the way to marry the wood pieces together and make a beautiful wooden gun cabinet that any home owner would be proud to display in their living room or den. This old fashioned traditional way of making furniture will let you the customer describe your wants and needs to the craftsman. Whether it to be made of a specific type of wood, cherry, oak, walnut or mahogany of a certain dimension that the gun cabinet has to be to fit into a particle place or setting. Being hand crafted and not pounced off with a jig on a machine allows you to have that custom one of a kind piece to fulfill you requirements.

If you are a collector or have a passion for firearms, rifles, shotguns, muzzleloader and pistols you are going to want a place or area to them. Way collect them if you cannot share them with the people you know would appreciate them. I cannot think of a better place than in the security of my home to show them off.

Having a handmade wooden gun cabinet to pass on to your heirs would be a precious family heirloom by its own right. If that beautiful crafted cabinet was to have your prized collection of rifles and shotguns to showcase inside your heirlooms cabinet and guns would be kept safe from damage and pass on to generation to generations to come.

If you cannot find an Amish craftsman locally there are some fine furniture makers all across America that still take a lot of pride and integrity in their craft. Most wooden gun cabinets are fitted with locks on the cabinet doors to insure that only authorized persons are to have access to your firearms inside. The gun storage supplies should be lockable to keep the ammunition and guns separate.

You firearms are not the only things that you can display inside your cabinet. I have seen arrowhead collections, Hummels, hunting knives and collectible knives. The display cabinet is very versatile. With the cost that you have already invested into your collection investing in a way to display them and keep them secure from damage helps protect that investment for you and your grandsons someday.